Fiber-optic network is used more and more nowadays. To complete the conversion of the optical fiber signal, we need a fiber optic modem at first. One of these products is RS-232 to Fiber Converter. Fiber optic modem provides RS-232/485/422 serial to fiber. It’s the best choice to host or distributed data acquisition system controller connected to the remote terminal unit. The product uses optical fiber as the transmission medium, to improve the system transmission performance, avoid harsh environments lightning surges and electromagnetic interference threat to communications equipment. Edit this section worksThe baseband modem (digital modem) transmit, receive, control, interface, operating panel and power supply and other components. Data terminal equipment in binary form of a serial signal to provide the data transmitted via the interface is converted to an internal logic level is fed to the transmitting section line requirements of the signal modulated by the modulating circuit is transmitted to the line. The receiving portion receives a signal from the line, after filtering, the restored after the reverse modulation, level conversion into a digital signal fed to the digital terminal equipment. Optical modem is a device similar to the baseband modem, baseband modem access fiber green, optical signal. Support point-to-point or loop (point-to-multipoint) connections. Supports RS-232, RS-422, RS-485 interface. Communication speed up to 120KBPS. Support 2-wire (half duplex) and 4-wire (full duplex) RS-485 work. Supports RS-232, RS-422, RS-485 multiple asynchronous communications protocol. FC, ST, SC fiber interface. Use multimode fiber working distance of up to 4KM. The use of single-mode fiber working distance up to 20KM.

Patch Cables are needed when we link the fiber-optic network fittings. Fiberstore recommend you multimode om3 simplex patch cord such as FC/FC 10G OM3 Simplex Patch Cables, a kind of OM3 Patch Cable, with high return loss and low insertion loss. The FC connectors used in our patch cords are designed to NTT-FC* standards with high quality zirconia ferrules and non-optical disconnect performance. The FC/FC OM3 10G fiber patch cables are with FC connectors at the ends of them. We supply FC/FC 10G OM3 simplex fiber patch cables with custom length and cable diameters. These cables are always applied in Fiber Optic Telecommunications and High speed transmission systems. They are fully compatible with existing FC hardware. Fiber Patch Cables also known as fiber jumpers or fiber patch cords.Fiber optic patch cable is one of most commonly used components in fiber optic network. 10G fiber optic patch cables provide 10 gigabit data transfer speeds in high bandwidth applications 5 times faster than standard 50um fiber cable. Works with both VCSEL laser and LED sources. Our 10G fiber optic patch cables are 100% optically tested for maximum performance. We have all lengths and connectors available.

Under normal circumstances, above two is enough for fiber-optic network. But in some of the more specialized field, a Punch Down Tool may be used too. Punch Down Tool, also called krone punch down tool, is a smallhand tool used by telecommunication and network technicians.It is used for inserting wire into insulation-displacement connectors on punch down blocks, patch panels, keystone modules, and surface mount boxes.Most punch down tools are of the impact type, consisting of a handle, an internal spring mechanism, and a removable slotted blade.FiberStore supply the Krone Punch Down Tool with competitive price. For more information, please contact our sales representative right now.